|
|
|
|
| Electronic Kits |
|
Page 27 |
Previous Page of New Items
|
|
|
Signal Generator |
Features: •Signal output: sine wave, triangle, square wave and integrator (selectable through jumper) •Signal frequency: about 1kHz (fixed) •Output level: adjustable from 0 to 100mVrms (LEVEL potentiometer) Specifications: •Power supply: 9V battery (not incl.) •Dimensions: 2.2" x 1.6" |
|
|
|
|
|
Miniature FM Radio |
Features : •Double fun: building and listening ! •Easy to assemble: no coils to wind •One single adjustment •Pre-assembled and tested FM front end •Receives the complete FM band: 88-108 MHz •With ON/OFF switch, volume control and LED indicator Specifications: •Power supply: 12V DC / 100mA (adaptor jack provided) •Dimensions: 4.8" x 3.3" |
|
|
|
|
|
Roulette |
37 LEDs. Spinning sound. 'Winner'-tune for each color. Spins LEDs between games. Pushbutton operation. Microprocessor technology. Specifications : •Auto power-off •Low power consumption •Power supply: 3 AA battery operation (not incl.) •Dimensions: 3.6" x 1.3" |
|
|
|
|
|
Traffic Light |
| Miniature traffic light as used on four-way junctions.
Realistic operation with adjustable delay. 12 LEDs. Great for model railroads, exhibitions, as a toy, ... Specifications: •Low power consumption: 15mA •Power supply: 9V battery (not incl.) •ON/OFF switch •Dimensions: 2.0" x 1.4" x 4.5" |
|
|
|
|
|
Brain Game (Simon Says) |
Just 4 LEDs and 4 push buttons provide hours of fun. The aim-of-the-game is to repeat a pattern, which is generated at random. The pattern is played both visually and audible or visually only (selectable). It features 4 difficulty levels, which can be selected at start-up. The replay speed gradually increases during the game, to make it even more challenging. Low power consumption. Microprocessor controlled. Auto power off. Specifications: •Power supply: 3 1.5V AA batteries (not incl.) •Dimensions: 2.0" x 2.6" |
|
|
|
|
|
Water Alarm |
| Gives alarm sound when water is detected. Incorporated alarm
buzzer. Water sensor can be placed at a distance by cutting the board and using wires to connect the sensor. Specifications: •Power supply: 9V battery (not incl.) •Dimensions: 1.8" x 2.8" |
|
|
|
|
|
Signal Injector Tracer |
This signal tracer /injector has been designed to inject or detect a specific signal into an audio circuit in need of repair (such as amplifiers, radios, tone controls, ...) so as to detect the fault. In this way problems can be traced more easily. The signal tracer may also be used as a simple monitor or amplifier Specifications: •Injector: •0-2.5Vrms output (adjustable) •Output impedance: 1.5Kohm •Frequency: ± 1kHz •Tracer: •3.5mV to 10Vrms sensitivity (adjustable) •Gain: 40dB •Input Impedance: 50Kohms •Dimensions: 2.4" x 2.1" •Power supply: 7-9V AC or 9-12V DC / 150mA |
|
|
|
